BPMNJ - 92180A, HEWLETT-PACKARD TONER

  • MSDS: BPMNJ
  • Manufacturer: NASHUA CORP
  • Product Name: 92180A, HEWLETT-PACKARD TONER
  • National Stock Number: 6850-01-347-5214
Product Identification

Product ID:92180A, HEWLETT-PACKARD TONER
MSDS Date:01/26/1987
FSC:6850
NIIN:01-347-5214
MSDS Number: BPMNJ

Responsible Party
NASHUA CORP
44 FRANKLIN ST
NASHUA, NH 03061
US

Emergency Phone: 603-880-5555

Info Phone: 800-258-1370

Preparer: R. L. SEVIGNY

Cage: 82784

Contractor
NASHUA
NASHUA, NH 03061 US

Telephone: 603-880-2323

Cage: 82784

Ingredients

STYRENE ACRYLIC COPOLYMER

Fraction By Weight: 85-95%


CARBON BLACK

CAS: 1333-86-4

RTECS: FF5800000

Fraction By Weight: 5-10%

OSHA PEL 3.5 MG/M3

ACGIH TLV: 3.5 MG/M3


SOLVENT BLACK 7

CAS: 8005-02-5

Fraction By Weight: 1-5%

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:NO KNOWN HEALTH HAZARD WHEN USED AS
INTENDED IN A COPY MACHINE.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:IRRITATION OF EYES AND RESPIRATORY TRACT MAY
OCCUR IN HEAVY DUST CONDITIONS.
Medical Cond Aggravated by Exposure:NONE KNOWN.

First Aid

First Aid:INHAL: REMOVE FROM EXPOSURE. SKIN: WASH SKIN WITH SOAP. EYE:
FLUSH EYES WITH WATER FOR AT LEAST 15 MIN. INGEST: DRINK WATER IF
INGESTED.

Fire Fighting

Extinguishing Media:WATER FOG, FOAM, DRY CHEMICAL, CO*2.
Fire Fighting Procedures:AVOID INHALATION OF SMOKE. WEAR NIOSH/MSHA
APPROVED SCBA AND FULL PROTECTIVE EQUIPMENT . COOL FIRE EXPOSED
CONTAINERS WITH WATER SPRAY.
Unusual Fire/Explosion Hazard:MATERIAL CAN FORM EXPLOSIVE MIXTURES WHEN
SUSPENDED IN AIR. ALL IGNITION SOURCES SHOULD BE AVOIDED.

Accidental Release

Spill Release Procedures:VACUUM OR SWEEP UP AS WITH ANY NON-TOXIC
POWDER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:DO NOT STORE NEXT TO STRONG OXIDIZERS.
EYE PROTECTION AND RESPIRATORS MAY BE REQUIRED FOR BULK HANDLING.
Other Precautions:AVOID EXCESSIVE EXPOSURE TO HEAT.

Exposure Controls

Respiratory Protection:NONE REQUIRED WHEN PRODUCT IS USED AS INTENDED.
NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN
.
Ventilation:LOCAL EXHAUST OR MECHANICAL (GENERAL) FOR NORMAL OFFICE
CONDITIONS.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE REQUIRED WHEN USED AS INTENDED.
Work Hygienic Practices:AVOID BREATHING DUST IF SAMPLE IS SPILLED.
Supplemental Safety and Health
MELTING PT: 160F,71C (SOFTENS).

Chemical Properties

Melt/Freeze Pt:M.P/F.P Text:SUPP DATA
Spec Gravity:1 (H*2O=1)
Solubility in Water:INSOLUBLE
Appearance and Odor:BLACK POWDER, FAINT ODOR.

Stability

Stability Indicator/Materials to Avoid:YES
NONE WITH COMMON MATERIALS WITH WHICH THE PRODUCT MAY REASONABLY COME
INTO CONTACT.
Stability Condition to Avoid:AVOID OPEN FLAME.
Hazardous Decomposition Products:TOXIC DECOMPOSITION PRODUCTS FOMED ON
COMBUSTION.

Disposal

Waste Disposal Methods:DISPOSE ACCORDING TO FEDERAL, STATE AND LOCAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.